Upper delivery assembly

1Remove the top cover (see page 115), the left and right side covers (page 123), and the main gear assembly (page 134).

2Face the left side of the printer.

3The delivery assembly is secured by three tabs on each side. Use the flat-blade screwdriver to gently release the tabs on each side, and then lift the assembly out.

Note

After you release one tab, lift the assembly only slightly until you release the tab on the opposite

 

side.

 

 

Figure 94.

Upper delivery assembly removal

 

 

CAUTION

The face-down bin-full sensor is on the left side of the upper delivery assembly. Be careful not to

 

damage it as you slide the delivery assembly out of the chassis.

 

 

 

 

Note

To reassemble the upper delivery assembly, slide the assembly straight down to lock it in place.

 

Make sure the face-down bin-full sensor is free to move on the left side.

 

 

Q1860-90918

6 Removing and replacing parts 161