Tray 1 roller
1Open the top cover and remove the toner cartridge.
2Facing the front of the printer, raise the green center handle of the registration assembly.
3Lift the locking tab (callout 1) on the
4Slide the roller between the two cams, and then remove the roller from the shaft.
1 2
Figure 69.Tray 1 roller removal
To reinstall
NoteIf the Tray 1 separation pad should be replaced, replace the separation pad before you replace the pickup roller (see “Tray 1 separation pad” on page 141).
1Orient the roller so that the thumb grip (callout 2) is on the left.
2Insert the roller onto the shaft, and then slide the roller to the right until it is seated.
3Slide the roller and cam to the left until they click into place.
Note | Make sure that the locking tab is engaged by trying to move the roller to the right. The roller will |
| not move if the locking tab is engaged. |
|
|
140 Removing and replacing parts |