HP 5100LE manual Front cover and Tray, Front cover removal

Front cover and Tray 1

Note The front cover and the Tray 1 guide must be removed individually.

1Open the front cover (callout 1).

2Disengage the Tray 1 guide pins (callout 2) from inside the front cover by pushing the guides outward. The cover and Tray 1 will separate from each other.

3Press the Tray 1 guide (callout 3) against the printer.

3

1 2

Figure 46.Front cover removal

4Release the front cover, allowing it to pivot freely on its keyed pins. The cover will slide off the pins to the right at its lowest position.

5Release the Tray 1 guide by allowing the guide to slide off the keyed pins at its lowest position.

Figure 47.Tray 1 guide removal

120 Removing and replacing parts Q1860-90918

www.GovTechMedia.com