5Release the tabs (callout 2) of the gear that is on the left side of the shaft, outside of the chassis, and slide the gear off.

2

Figure 84. Tray 1 shaft removal (2 of 2)

6Slide the shaft to the right, and then angle it out of the chassis.

Note

Make sure that the Tray 1 lift plate (with its spring) is pressed down before you reinstall the Tray 1

 

shaft. The shaft holds the Tray 1 lift plate, and must be installed on top of it. Also make sure that

 

the shaft is reinstalled in the correct orientation.

 

 

Q1860-90918

6 Removing and replacing parts 151

www.GovTechMedia.com

Page 153
Image 153
HP 5100LE manual Tray 1 shaft removal 2