HP 5100LE manual Tray 2 shaft removal left side view of printer

Tray 2 shaft

1Remove the top cover (see page 115), the left and right side covers (page 123), the pickup gear assembly (page 136), the paper-handling PCA (page 131), and the paper-feed roller assembly (page 144).

2Remove the small spring from the gear that is on the left side of the shaft (see figure 65 on page 136, callout 1).

3Turn the Tray 2 shaft to align the solenoid arm (callout 1) with the gap in the gear (on the left side of the printer).

4Press the release tabs (callout 2) outward, and slide the gear off of the shaft.

5Remove the bushing on the right side of the shaft by lifting the release tab and sliding the bushing off of the shaft.

6Slide the shaft to the right, then angle it out of the chassis.

12

Figure 85.Tray 2 shaft removal (left side view of printer)

152 Removing and replacing parts Q1860-90918

www.GovTechMedia.com