EIO menu (HP LaserJet 5100tn and 5100dtn printers)

EIO (enhanced input/output) menus depend on the particular accessory product that is installed in an EIO slot of the printer. If the printer contains an HP Jetdirect print server EIO card, you can configure basic networking parameters using the EIO Menu. These and other parameters can also be configured through HP Jetdirect or the HP Jetdirect EIO Web server.

Table 22. EIO menu for networked printers

Item

Values

Explanation

CFG NETWORK=NO

NO

NO: The Jetdirect menu is not available.

 

YES

YES: The Jetdirect menu appears.

 

 

 

NOVELL=ON

ON

Select whether the IPX/SPX protocol stack (in Novell

 

OFF

NetWare networks, for example) is enabled (on) or disabled

 

 

(off).

 

 

 

DLC/LLC=ON

ON

Select whether the DLC/LLC protocol stack is enabled (on)

 

OFF

or disabled (off).

 

 

 

TCP/IP=ON

ON

Select whether the TCP/IP protocol stack is enabled (on) or

 

OFF

disabled (off).

 

 

 

ATALK=ON

ON

Select whether the Apple EtherTalk protocol stack is enabled

 

OFF

(on) or disabled (off).

 

 

 

CFG IPX/SPX=NO

NO

NO: The IPX/SPX menu is not available.

 

YES

YES: The IPX/SPX menu appears. In the IPX/SPX menu,

 

 

you can specify the frame-type parameter that is used on

 

 

your network. The default is AUTO, to automatically set and

 

 

limit the frame type to the one detected.

 

 

For Ethernet cards, frame-type selections are EN_8023,

 

 

EN_II, EN_8022, and EN_SNAP.

 

 

For token ring cards, frame type selections are TR_8022 and

 

 

TR_SNAP.

 

 

In the IPX/SPX menu for token ring cards, you can also

 

 

specify NetWare Source Routing parameters, which are SRC

 

 

RT_AUTO (default), OFF, SINGLE R, or ALL RT.

 

 

 

CFG TCP/IP=NO

NO

 

YES

NO: The TCP/IP menu is not available.

YES: The TCP/IP Menu appears. In the TCP/IP menu, you can specify BOOTP=YES or BOOTP=NO for TCP/IP parameters to be automatically loaded from a bootp or DHCP server when the printer is turned on. If you specify BOOTP=NO and DCHP=NO, you can manually set selected TCP/IP parameters from the control panel. You can manually set each byte of the IP address (IP), Subnet Mask (SM), Syslog Server (LG), and Default Gateway (GW). For example:

Byte 1

192.0.0.192

Byte 4

Byte 2

Byte 3

If the Syslog Server IP address is left blank, the printer will still work. Also, you can manually set the timeout time period.

56 Printer operation

Q1860-90918

www.GovTechMedia.com

Page 58
Image 58
HP 5100LE manual EIO menu HP LaserJet 5100tn and 5100dtn printers, EIO menu for networked printers Values Explanation