HP 5100LE manual Site requirements, Environmental and power requirements

Site requirements

Environmental and power requirements

The following environmental specifications must be maintained to ensure the proper operation of the printer. Consider the following points before installing the printer:

Install the printer in a well-ventilated, dust-free area.

￿Install the printer on a hard, flat, and continuous surface on which all four printer feet are level. Do not install the printer on carpet or other soft surfaces.

Make sure that adequate power is supplied. The printer power requirements are listed in

￿table 3.

Install the printer where temperature and humidity are stable, and away from water sources,

￿humidifiers, air conditioners, refrigerators, or other major appliances.

Install the printer away from direct sunlight, open flames, or ammonia fumes. If the printer is

￿placed near a window, make sure the window has a curtain or blind to block any direct sunlight.

Install the printer with enough space around it for proper access and ventilation.

￿Install the printer away from the direct flow of exhaust from air-ventilation systems.

Table 3. Power requirements

		Amps	Amps (rated	Watts (average maximum,
		(current	short-term	based on HP LaserJet 5100dtn
Volts	Frequency	rating)	current)	printer)
100 to 127 Vac	50 to 60 Hz	5.4 amps	6 amps	printing = 480
(+/-10%)	(+/-3 Hz)			standby = 24
				PowerSave on = < 30 (ENERGY
				STAR® )*
				printer off = 0
220 to 240 Vac	50 to 60 Hz	2.5 amps	3 amps	printing = 515
(+/-10%)	(+/-3 Hz)			standby = 29
				PowerSave on = < 30 (ENERGY
				STAR® )*
				printer off = 0

*ENERGY STAR is a U.S. registered service mark of the United States Environmental Protection Agency.

20 Printer description Q1860-90918

www.GovTechMedia.com