HP 5100LE manual Tray 1 inner cover removal 2 of 2, front of printer

2Remove the two self-tapping screws (callout 2) that hold the cover to the front of the chassis.

2

Figure 53. Tray 1 inner cover removal (2 of 2, front of printer)

3Facing the front of the printer, slip the cover off of the locator pins by tilting it to the right and then sliding it off to the right, avoiding the paper sensor.

Note	An extension of the paper-sensor flag fits into a slot in the Tray 1 lift plate (see page 154). Orient
	the flag so that it aligns with both the slot and the cutout in the left side of the chassis.

Q1860-90918 6 Removing and replacing parts 125

www.GovTechMedia.com