HP 5100LE manual Tray 2 separation pad removal 1

Tray 2 separation pad

Note This procedure applies to Tray 2 and to any optional 250-sheet tray.

1Remove the paper from the tray.

Note Callout 1 in figure 73 shows a detail of the separation pad.

2While pressing down the paper lift plate (callout 2), reach under the front of the tray and squeeze the black tabs (callout 3 in figure 74) to release the separation pad from the tray.

2

1

Figure 73. Tray 2 separation pad removal (1 of 2)

3

Figure 74. Tray 2 separation pad removal (2 of 2)

3Pull the spring off of the old separation pad, and then insert the spring onto the new separation pad.

4Replace the separation pad.

Q1860-90918 6 Removing and replacing parts 143

www.GovTechMedia.com