HP 5100LE manual Printing menu Values Explanation

Printing menu

Some items in this menu can be opened from a software application, or from the printer driver (if the appropriate driver is installed). Printer-driver and software application settings override control panel settings.

Table 19. Printing menu

Item	Values	Explanation
COPIES=1	1 to 999	Set the default number of copies by selecting any number
		from 1 to 999. Press
		[-Value+]once to change the setting by increments of 1, or
		hold down [-Value+]to scroll by increments of 10.
		Note: It is best to set the number of copies from the printer
		driver or software application. (Driver and software settings
		override control panel settings.)
PAPER=LETTER	For supported paper	Set the default image size for paper and envelopes. (The
(110 V printers)	sizes	item name will change from paper to envelope as you scroll
or	see page 25.	through the available sizes.)
PAPER=A4		Note: It is best to set the number of copies from the printer
(220 V printers		driver or software application. (Driver and software settings
and		override control panel settings.)
ENVELOPE=COM10
(110 V printers)
ENVELOPE=DL
(220 V printers)
CONFIGURE CUSTOM	NO	NO: The custom paper menu items are not accessible.
PAPER=NO	YES	YES: The custom paper menu items appear (see the next
		three items).
UNIT OF	INCHES	This item appears only when CONFIGURE CUSTOM
MEASURE=INCHES	MILLIMETERS	PAPER=YES. Select the unit of measurement for the custom
(110 V printers)		paper size.
or
MILLIMETERS
(220 V printers)
X DIMENSION=	3.00 to 12.28	This item appears only when CONFIGURE CUSTOM
12.28 INCHES	INCHES	PAPER=YES. Select the dimension of the leading edge to be
(110 V printers)	(110 V printers)	fed into the printer (short edge).
or	or
312 MILLIMETERS	76 to 312
(220 V printers)	MILLIMETERS
	(220 V printers)
Y DIMENSION=	5.00 to 18.50	This item appears only when CONFIGURE CUSTOM
17.70 INCHES	INCHES	PAPER=YES. Select the other dimension (long edge).
(110 V printers)	(110 V printers)
or	or
470 MILLIMETERS	127 to 470
(220 V printers)	MILLIMETERS
	(220 V printers)

ORIENTATION= PORTRAIT

PORTRAIT LANDSCAPE

Determine the default orientation of print on the page. Note: It is best to set the page orientation from the printer driver or software application. (Driver and software settings override control panel settings.)

	FORM=60 LINES	5 to 128	Set vertical spacing from 5 to 128 lines for default paper
	(110 V printers)		size. Press [-Value+]once to change the setting by an
	or		increment of 1, or hold down [-Value+]to scroll by
	64 LINES		increments of 10.
	(220 V printers)
Q1860-90918			Chapter 3 Printer operation 51

www.GovTechMedia.com