Tray 1 shaft

1Remove the top cover (see page 115), the left and right side covers (page 123), the pickup gear assembly (page 136), and the paper-handling PCA (page 131).

2Remove the plastic collar on the outside, right of the chassis, by pulling outward on the collar’s release tab and sliding the collar off of the shaft.

3Raise the green center handle of the registration assembly.

4Release the collar on the inside, right of the chassis by pulling up on the release tab (callout 1), and sliding the collar to the left.

1

Figure 83.Tray 1 shaft removal (1 of 2, right side view of printer)

150 Removing and replacing parts

Q1860-90918

www.GovTechMedia.com

Page 152
Image 152
HP 5100LE manual Tray 1 shaft removal 1 of 2, right side view of printer