HP 5100LE manual Formatter assembly removal

Formatter assembly

1Print a menu map and a configuration page, if possible, to use as a reference when you reinstall the new formatter.

2Remove any EIO accessories from the EIO slots.

3Facing the back of the printer, loosen the two captive screws (callout 1) and slide the formatter assembly out.

4Remove any DIMMs from the DIMM slots.

1

Figure 68.	Formatter assembly removal
Note	After you reinstall the formatter, update the printer configuration, if necessary, using the pages
	that you printed in step 1 (see “Service mode” on page 59).

Q1860-90918 6 Removing and replacing parts 139

www.GovTechMedia.com