Registration assembly

1Remove the top cover (see page 115), the left side cover (page 123), the pickup gear assembly (page 136), the main gear assembly (page 134), and the transfer guide (page 128, steps 1 and 2).

2Release the e-ring (callout 1) that is on the registration assembly clutch, and remove the clutch.

1

Figure 92. Registration assembly removal (1 of 2)

3Remove two screws in the top, middle of the printer (see figure 76 on page 145, callout 1).

Note

These screws are already removed if you have removed the paper-feed roller assembly. They are

 

common to both the paper-feed roller assembly and the registration assembly.

 

 

Q1860-90918

6 Removing and replacing parts 159

www.GovTechMedia.com

Page 161
Image 161
HP 5100LE manual Registration assembly removal 1