HP 5100LE manual Jetdirect configuration

Table 54. HP Jetdirect configuration page categories (continued)

4 Novell/NetWare	This block should state the Novell printer server name to which the printer is
	connected. If the node name reads “NPIxxxxxx” (where xxxxxx = the last six
	digits of the EIO’s LAN address), the EIO card has not been configured for a
	Novell server. This could indicate that the card is operating under another
	protocol than Novell. Check with the network administrator to determine
	what Node Name might be appropriate.

1

4

2

3

Figure 127. Jetdirect configuration page

226 Troubleshooting Q1860-90918

www.GovTechMedia.com