HP 5100LE manual Fuser removal rear view of printer

Fuser

1Remove the rear door and rear output bin (see page 113).

2Facing the back of the printer, remove the two machine screws (callout 1) that hold the fuser in the chassis.

3Insert a small, flat-blade screwdriver under the fuser (at callout 2), and lift to disengage the fuser assembly detents.

4Grasp the green pressure-release handles (callout 3) and pull the fuser out of the chassis.

Note The fuser power connection is on the left side of the assembly.

3

2

1

Figure 39.Fuser removal (rear view of printer)

114 Removing and replacing parts Q1860-90918

www.GovTechMedia.com