•Never use gasoline, benzine, thinner, alcohol or the like. Discoloration, deformation or cracks may result.

Replacing carbon brushes

002923

Bit angle

1

1. Change ring

2

1

3

001146

1.Commutator

2.Insulating tip

3.Carbon brush

002939

When the resin insulating tip inside the carbon brush is exposed to contact the commutator, it will automatically shut off the motor. When this occurs, both carbon brushes should be replaced. Keep the carbon brushes clean and free to slip in the holders. Both carbon brushes should be replaced at the same time. Use only identical carbon brushes.

The bit can be secured at 12 different angles. To change the bit angle, slide the change ring forward, then turn the change ring to change the bit angle. At the desired angle,

Remove the screws which secure the rear cover. Pry up the rear cover with a screwdriver and remove it.

slide the change ring back to the original position. The bit will be secured in place.

NOTE:

•The change ring cannot turn when the bit is not installed on the tool.

OPERATION

Chipping/Scaling/Demolition

1

2

3

002953

1.Screwdriver

2.Rear cover

3.Screws

002945

Hold the tool firmly with both hands. Turn the tool on and apply slight pressure on the tool so that the tool will not bounce around, uncontrolled. Pressing very hard on the tool will not increase the efficiency.

MAINTENANCE

CAUTION:

•Always be sure that the tool is switched off and unplugged before attempting to perform inspection or maintenance.

Use a screwdriver to remove the brush holder caps. Take out the worn carbon brushes, insert the new ones and secure the brush holder caps.

1

 

1. Screwdriver

 

2

2. Brush holder cap

 

 

002954

Lubrication

CAUTION:

•This servicing should be performed by Makita Authorized or Factory Service Centers only.

This tool requires no hourly or daily lubrication because it has a grease-packed lubrication system. It should be relubricated after every 6 months of operation. Send the complete tool to Makita Authorized or Factory Service

6

Page 5 Page 7
Page 6
Image 6
Makita HM1202C instruction manual Operation, Maintenance
Page 5 Page 7

HM1202, HM1202C specifications

The Makita HM1202C and HM1202 are innovative demolition hammers designed for heavy-duty applications, combining high performance with advanced technology to deliver optimal results. These powerful tools are perfect for contractors, construction professionals, and DIY enthusiasts looking for reliable equipment to tackle tough tasks.

One of the standout features of the Makita HM1202C and HM1202 is their robust 10 AMP motor. This powerful motor ensures that both models deliver exceptional impact energy, making them highly effective for demolishing concrete, brick, and masonry. The HM1202C offers a maximum impact energy of 9.6 joules, while its companion model, the HM1202, provides a slightly lower impact energy, catering to various job requirements.

Both models are equipped with an impressive blow frequency, allowing users to achieve faster work rates. This is particularly beneficial during large-scale demolition or renovation projects where time is of the essence. Additionally, the hammers come with a soft-start feature, providing greater control upon initial activation, which enhances user safety and precision.

The design of the HM1202C and HM1202 includes an ergonomic structure that minimizes user fatigue during extended use. The tools feature a rubberized grip that absorbs vibrations, allowing for comfortable handling even in challenging working conditions. Furthermore, the integrated anti-vibration technology significantly reduces vibrations and enhances user comfort, making these hammers ideal for long periods of operation.

Another key characteristic of the Makita HM1202C and HM1202 is their durability. Constructed with high-quality materials, these demolition hammers are designed to withstand tough working environments and ensure longevity. The built-in dust collection system further protects the motor and internal components from debris, maintaining performance and reliability.

Additionally, both models are compatible with a range of chisels and bits, giving users versatility for various applications. This adaptability makes them suitable for both heavy-duty tasks and more delicate jobs, allowing professionals to achieve excellent results across different projects.

In summary, the Makita HM1202C and HM1202 demolition hammers are powerful, durable, and user-friendly tools that cater to the needs of construction professionals. With their advanced technology, ergonomic design, and compatibility with a variety of attachments, these hammers are reliable solutions for any demolition task, ensuring efficiency and effectiveness on every job site.
Top Page Image Contents