Side handle
The side handle can be secured in four positions (right, left, up and down).
To secure the side handle, tighten the wing nut securely. Never secure the side handle in other than the above four positions.
Side grip
The side grip is convenient for downward drilling or chipping operations. Screw the side grip on the tool securely. The side grip can be installed on either side of the tool for right or left hand operation.
Installing or removing drill bit or other bits (bull point, etc.)
CAUTION:
Always be sure that the tool is switched off and unplugged before installing or removing the bit.
Insert the bit into the tool holder as far as it will go, Pull out and turn the tool retainer 180 degrees. Then release it to secure the bit.
To remove the bit, follow the installation procedure in reverse.
5
