Positioningfor adjusting the miter angle
The turn base turns up to 52" to the left I and 52" to the right. Loosen the grip by turning counterclockwise. Turn the turn base while pressing down the lock lever. When you have moved the grip to the posi- tion where the pointer points to the desired angle on the miter scale, securely tighten the grip clockwise.
Miter scale | Lock lever |
CAUTION:
*When turning the turn base, be sure to raise the handle fully
*After changing the miter angle, always secure the turn base by tightening the grip firmly.
Positioningfor adjusting the bevel angle
The saw blade tilts up to 45" to the left. To adjust the bevel angle, loosen the lever at the rear of the tool. Push the handle to the left to tilt the saw blade until the pointer points to the desired angle on the bevel scale. Tighten the lever to secure the arm.
Arm
Bevel scale
Lever
Pointer
CAUTION:
*When tilting the saw blade, be sure to raise the handle fully.
*After changing the bevel angle, always secure the arm by tightening the lever.
Securingworkpiece
WARNING:
It is extremely important to always secure the workpiece properly and tightly with the vise. Failure to do so can cause the tool to be damaged and/or the workpiece to be destroyed. PERSONAL INJURY MAY ALSO RESULT. Also, after a cutting operation, DO NOT raise the blade until the blade has come to a complete stop.
15
