Replacingfluorescent tube (Fig. 3 & 4)
CAUTION:
1, Do not give the fluorescent tube a shock or mar it. It may result in a risk of breakage of the glass and a serious personal injury.
2.Do not touch the fluorescent tube which is hot in use or immediately after putting out light. You may get burnt.
3.Always be sure that the battery cartridge is removedbefore replacing the fluorescent tube or maintenance.
Remove the connecting ring and pull the lamp cover straight out to remove it. Then remove the cap and pull the tube to replace the tube.
To install the lamp cover, place the cap on the tube. Then insert the lamp cover so that the protrusion on the tool fits into the groove on the lamp cover.And insert the connecting ring so that the pin on the connecting ring fits into the groove on the lamp cover.
Strap and hook
Install the strap on the tool. (Flg.5)
When storing the tool, hang the metal fitting of the strap on the ring of the tool. (Fig. 6)
CAUTION:
Do not shake the tool when the hook is pulled out. The hook can catch something accidentally.
Do not use the hook except when you hang the tool. This may result in a risk of breakage of the tool.
The hook can be turned, slid and stored around the lamp cover. (Fig. 7) The hook also can be removed when you do not use it.
To maintainproduct safety and reliability, repairs, maintenanceor adjustmentshould be carriedout by a Makita Authorized Service Center.
ACCESSORIES
CAUTION:
These accessoriesor attachmentsare recommendedfor use with your Makitatool specifiedin this manual.The use of any other accessories or attachments might present a risk of injury to persons. The accessories or attachments should be used only in the proper and intended manner.
Fluorescenttube
