[ 2 ] Error codes shown in the "MACHINE ERROR X X " message
Error Code |
|
X X | Error factor |
(Hex.) |
|
|
|
( 71 | Laser scanner motor does not lock. ) |
|
|
( 72 | Cannot detect Beam Detect signal. ) |
|
|
( 73 | No toner cartridge loaded. ) |
|
|
( 74 | Toner empty. ) |
|
|
( 75 | |
|
|
( 76 | Fixing heater harness disconnected or broken. ) |
|
|
( 77 | Heater thermister short circuit.) |
|
|
( 78 | Heater thermister harness disconnected or broken. ) |
|
|
( 79 | Toner thermister disconnected or broken. ) |
|
|
( 80 | Paper size setting error. ) |
|
|
( 82 | Paper feeding error. ) |
|
|
( 83 | Paper jam. The registration sensor remains ON.) |
|
|
( 84 | Paper jam. The paper ejection sensor remains ON. ) |
|
|
( 88 | Paper jam. Even after the registration sensor has gone OFF, the paper |
| ejection sensor still stays OFF.) |
|
|
( A1 | Top cover opened. ) |
|
|
( A2 | Document too long to scan. ) |
|
|
( A3 | Document not detected by the document rear sensor. ) |
|
|
( A4 | 50% or more faulty of white level data. ) |
|
|
( A7 | |
|
|
( A8 | |
|
|
( A9 | Abnormal scanning reference voltage. ) |
|
|
( AC | Less than 50% faulty of white level data. ) |
|
|
Error codes in parentheses do not appear in the "MACHINE ERROR X X", since those errors are displayed as messages described in "[ 1 ] Error messages on the LCD." Those error codes appear in the communications error list if an equipment error occurs during communications. Refer to Section 1.2, (13).
VI - 4