EEPROM Customizing Codes
This function allows you to customize the EEPROM according to language, function settings, and
firmware switch settings.
n Operating Procedure
(1) FAX3750/MFC7750: To make the equipment enter the maintenance mode, press the
Function, *, 2, 8, 6, and 4 keys in this order.
Within 2 seconds
FAX-8650P: To make the equipment enter the maintenance mode, press the Menu,
*, 2, 8, 6, and 4 keys in this order.
Within 2 seconds
The equipment beeps for approx. one second and displays " " on the
LCD.
(2) Press the 7 and 4 keys in this order in the initial stage of the maintenance mode.
The current customizing code (e.g., 1001 in the case of FAX3750 U.S.A. versions) appears.
(3) Enter the desired customizing code (e.g., 0002 in the case of FAX3750 Canadian versions).
The newly entered code appears.
NOTE: If a wrong 4-digit code is entered, the equipment will malfunction.
(4) Press the Start key.
The equipment saves the setting and returns to the initial stage of the maintenance mode.
If you press the Stop key or no keys are pressed for one minute in the above procedure, the
equipment stops the procedure and returns to the initial stage of the maintenance mode.