(5)Disassemble the handset mount by unhooking two latches "a" of the upper handset mount with a flat screwdriver.

(6)Remove the hook switch PCB ASSY by unhooking latch "b."

(7)Disconnect the hook switch harness from the hook switch PCB

nReassembling Notes

When assembling the upper and lower handset mounts, route the hook switch harness underneath the hook switch PCB and through the cutout as shown above. Take care not to pinch the harness between the upper and lower mounts.

IV - 25

Page 63
Image 63
Brother FAX-8650P service manual Reassembling Notes