III - 12

3. CONTROL ELECTRONICS

3.1 Configuration

The hardware configuration of the facsimile equipment is shown below.

Configuration of Facsimile Equipment

(NOTE 1) Provided on the FAX-8650P.
*1 On the document sensor PCB are these sensors:
- Document rear sensor (PH1)
- Document front sensor (PH2)
*2 On the main PCB are these sensors:
- Top cover sensor (PC1)
- Sheet feeder cover sensor (PC2)
- Registration sensor (PC3)
*3 On the toner sensor PCB are these sensors:
- Toner sensor
- Toner thermister
*4 On the high-voltage power supply PCB is the paper
ejection sensor.
*5 On the hook switch PCB is the hook switch.
(Not provided on the FAX-8650P.)