1.ENTRY INTO THE MAINTENANCE MODE

FAX3750/MFC7750: To make the equipment enter the maintenance mode, press the Function, *, 2, 8, 6, and 4 keys in this order.

Within 2 seconds

FAX-8650P: To make the equipment enter the maintenance mode, press the Menu, *, 2, 8, 6, and 4 keys in this order.

Within 2 seconds

The equipment beeps for approx. one second and displays " " on the LCD, indicating that it is placed in the initial stage of the maintenance mode, a mode in which the equipment is ready to accept entry from the keys.

To select one of the maintenance-mode functions listed in Section 2, enter the corresponding 2- digit function code with the numerical keys on the control panel. (The details of each maintenance-mode function are described in Section 3.)

NOTES: • Pressing the 9 key twice in the initial stage of the maintenance mode makes the equipment exit from the maintenance mode, restoring it to the standby state.

Pressing the Stop key after entering only one digit restores the equipment to the initial stage of the maintenance mode.

If an invalid function code is entered, the equipment resumes the initial stage of the maintenance mode.

V - 1

Page 88
Image 88
Brother FAX-8650P service manual Entry Into the Maintenance Mode