nPreparation
Prior to proceeding to the disassembly procedure,
(1)Unplug
-the modular jack of the telephone line,
-the modular jack of the curled cord (and remove the handset),
-the PC interface cable, and
-the modular jack of an external telephone set if connected. (Not shown below.)
(2)Remove
-the dust cover,
-the paper wire extension
-the document wire extension
-the document tray,
-the paper tray, and
-the drum unit (with the toner cartridge loaded)
(*Not provided on the
nHow to Access the Object Component
•On the next page is a disassembly order flow which helps you access the object components.
To remove the gear drive unit, for example, first find it on the flow and learn its number (
in this case). You need to remove parts numbered 
, 
, 
, 
, 
, and 
so as to access the gear drive unit.
•Unless otherwise specified, the disassembled parts or components should be reassembled in the reverse order of removal.
IV - 3
