Brother FAX-8650P service manual Change Drum Soon

	WSW29 (Function setting 7)
Selector	Function	Setting and Specifications
No.
1
	Not used.
6
7	Automatic dialing by caller IDs	0: Yes	1: No
	stored in the memory
8	Beep when the memory area for	0: No	1: Yes
	the activity report becomes full

NOTE: Selector 7 is applicable to those versions supporting the caller ID service. Note that it is not applicable to the U.S.A. versions.

NOTE: Selector 8 is applicable to the European versions only.

•Selector 7: Automatic dialing by caller IDs stored in the memory

This selector determines whether or not the automatic dialing function by caller IDs stored in the memory (see the Note below) can be accessed.

If it is set to "0," caller IDs stored in the memory can be called up on the LCD by the user function 6-7 and then pressing the Start key when the desired caller ID is displayed dials the caller automatically.

(Note: The equipment can store a maximum of the latest 30 incoming caller IDs together with the reception date and time in the memory.)

•Selector 8: Beep when the memory area for the activity report becomes full

If this selector is set to "1," the equipment will beep when the memory area for the activity report becomes full (as well as displaying a message on the LCD, prompting the output of the activity report).

	WSW30 (Function setting 8)
Selector	Function	Setting and Specifications
No.
1
	Not used.
7
8	"CHANGE DRUM SOON"	0: Yes	1: No
	message

•Selector 8: "CHANGE DRUM SOON" message

This selector determines whether or not the "CHANGE DRUM SOON" message should appear on the LCD when the service life of the laser-sensitive drum in the laser unit will expire soon.

V - 41