General Safety Precautions

●Disconnect all power before removing the back panel of any Extreme Networks switch, unless otherwise instructed by a product specific maintenance procedure.

●Disconnect all power cords before working near power supplies, unless otherwise instructed by a product-specific maintenance procedure.

●When you handle modules, optic devices, power supplies, or other modular accessories put on an ESD-preventive wrist strap to reduce the risk of electronic damage to the equipment. Connect the other end of the strap to the ESD connector on the front of the chassis. Leave the ESD-preventive wrist strap permanently attached to the chassis so that it is always available when you need to handle ESD-sensitive components.

●Install all cables in a manner that avoids strain. Use tie wraps or other strain relief devices.

●Replace power cord immediately if it shows any signs of damage.

General Safety Precautions

Follow these guidelines:

●Do not attempt to lift objects that you think are too heavy for you.

●When you install equipment in a rack, load heavier devices in the lower half of the rack first to avoid making the rack top-heavy.

●Only use tools and equipment that are in perfect condition. Do not use equipment with visible damage.

●Routing cables: Route cables in a manner that prevents possible damage to the cables and avoids causing accidents, such as tripping.

Cable Routing for LAN Systems

The BlackDiamond 8800 series switches meet the requirements for LAN system equipment. LAN systems are designed for intra-building installations; that is, cable runs between devices must be in the same building as the connected units.

This equipment can be connected between buildings if any one of the following conditions is true:

●Cable runs between buildings are less than 140 feet long.

●Cable runs between buildings are directly buried.

●Cable runs between buildings are in an underground conduit, where a continuous metallic cable shield or a continuous metallic conduit containing the cable is bonded to each building grounding electrode system.

CAUTION

Failure to follow these requirements for cable routing conditions may expose the user to electrical shock and expose the unit to errors or damage.

BlackDiamond 8800 Series Switches Hardware Installation Guide

157

 

 

Page 156 Page 158
Page 157
Image 157
Extreme Networks 8800 Series manual General Safety Precautions, Cable Routing for LAN Systems
Page 156 Page 158

8800 Series specifications

Extreme Networks 8800 Series is a robust family of network switches designed to cater to the demands of modern data centers and enterprise networks. Engineered for high performance, scalability, and reliability, these switches provide an ideal solution for organizations looking to enhance their network infrastructure.

One of the standout features of the 8800 Series is its high-performance architecture, which supports up to 10 terabits per second of switching capacity. This ensures that the switch can handle the increased bandwidth demands of today’s applications, such as cloud computing and big data analytics. The series also supports a wide range of interface options, including 1G, 10G, and 40G ports, allowing for flexible deployment in various network environments.

A critical advantage of the Extreme Networks 8800 Series is its advanced virtualization capabilities. It supports network virtualization technologies such as Virtual Extensible LAN (VXLAN) and Segment Routing, which help create resilient, efficient, and scalable network topologies. These technologies not only reduce the complexity of the network but also enhance operational efficiency by simplifying the management of virtualized environments.

The 8800 Series comes with built-in cybersecurity features, ensuring that the network remains protected against growing threats. With capabilities such as IEEE 802.1X port authentication and advanced encryption standards, the series effectively secures data integrity and confidentiality. Additionally, Extreme’s “SecureStack” technology further bolsters security by providing robust access control mechanisms, ensuring that only authorized devices can connect to the network.

Another notable characteristic of this series is its Ethernet platform, which supports multigigabit Ethernet up to 100G, enabling organizations to future-proof their network infrastructure. The switches are designed with energy efficiency in mind, utilizing advanced power management technologies that reduce energy consumption and operating costs, making them environmentally friendly solutions.

The availability of centralized management through Extreme Networks’ management software simplifies the complexity of network operations. Features like Zero Touch Provisioning (ZTP) streamline deployment processes, allowing IT teams to quickly implement and configure devices with minimal manual intervention.

In summary, the Extreme Networks 8800 Series offers a comprehensive set of features and advanced technologies designed to meet the demands of high-performance networking. With its scalability, virtualization support, robust security measures, and energy efficiency, the 8800 Series stands out as a superior choice for organizations seeking to enhance their network capabilities and embrace the future of connectivity.
Top Page Image Contents