Meeting Power Requirements

AC Power Cable Requirements

Use an AC power cable appropriate for your country. Check your local electrical codes and regulatory agencies for power cable requirements. The countries listed in Table 13 have additional requirements as listed in the table.

Table 13: AC Power Cable Requirements

Country

Requirements

 

 

USA and Canada

• The cable set must be UL-approved and CSA-certified.

 

• The minimum specification for the flexible cable is No. 18 AWG (1.5 mm2),

 

Type SVT or SJT, 3-conductor.

 

• The cable set must have a rated current capacity of at least the amount rated for

 

each specific product.

 

• The attachment plug must be either an Earth-grounding type with a NEMA

 

5-15P (10 A, 110 V) configuration or a NEMA L6-15P (10 A, 208/240 V)

Denmark

The supply plug must comply with section 107-2-D1, standard DK2-1a or DK2-5a.

Switzerland

The supply plug must comply with SEV/ASE 1011.

Argentina

The supply plug must comply with Argentinian standards.

 

 

NOTE

When using dual power supplies, make sure that each AC power supply attaches to an independent power source.

Replacing the Power Cable

If the power cable plug is unsuitable and must be replaced, connect the power supply wires for the switch according to the following scheme:

Brown wire to the Live (Line) plug terminal, which may be marked with the letter “L” or colored red.

Blue wire to the Neutral plug terminal, which may be marked with the letter “N” or colored black.

Yellow/Green wire to the Ground plug terminal, which may be marked with the letter “E” (the Earth symbol) or colored yellow/green.

Uninterruptible Power Supply Requirements

An uninterruptible power supply (UPS) is a device that sits between a power supply (such as a wall outlet) and a device (such as a switch) to prevent outages, sags, surges, and bad harmonics from adversely affecting the performance of the device.

A UPS traditionally can perform the following functions:

Absorb relatively small power surges.

Smooth out noisy power sources.

Continue to provide power to equipment during line sags.

Provide power for some time after a blackout has occurred.

In addition, some UPS or UPS plus software combinations provide the following functions:

Automatically shut down equipment during long power outages.

BlackDiamond 8800 Series Switches Hardware Installation Guide

67

 

 

Page 67
Image 67
Extreme Networks 8800 Series manual AC Power Cable Requirements, Uninterruptible Power Supply Requirements

8800 Series specifications

Extreme Networks 8800 Series is a robust family of network switches designed to cater to the demands of modern data centers and enterprise networks. Engineered for high performance, scalability, and reliability, these switches provide an ideal solution for organizations looking to enhance their network infrastructure.

One of the standout features of the 8800 Series is its high-performance architecture, which supports up to 10 terabits per second of switching capacity. This ensures that the switch can handle the increased bandwidth demands of today’s applications, such as cloud computing and big data analytics. The series also supports a wide range of interface options, including 1G, 10G, and 40G ports, allowing for flexible deployment in various network environments.

A critical advantage of the Extreme Networks 8800 Series is its advanced virtualization capabilities. It supports network virtualization technologies such as Virtual Extensible LAN (VXLAN) and Segment Routing, which help create resilient, efficient, and scalable network topologies. These technologies not only reduce the complexity of the network but also enhance operational efficiency by simplifying the management of virtualized environments.

The 8800 Series comes with built-in cybersecurity features, ensuring that the network remains protected against growing threats. With capabilities such as IEEE 802.1X port authentication and advanced encryption standards, the series effectively secures data integrity and confidentiality. Additionally, Extreme’s “SecureStack” technology further bolsters security by providing robust access control mechanisms, ensuring that only authorized devices can connect to the network.

Another notable characteristic of this series is its Ethernet platform, which supports multigigabit Ethernet up to 100G, enabling organizations to future-proof their network infrastructure. The switches are designed with energy efficiency in mind, utilizing advanced power management technologies that reduce energy consumption and operating costs, making them environmentally friendly solutions.

The availability of centralized management through Extreme Networks’ management software simplifies the complexity of network operations. Features like Zero Touch Provisioning (ZTP) streamline deployment processes, allowing IT teams to quickly implement and configure devices with minimal manual intervention.

In summary, the Extreme Networks 8800 Series offers a comprehensive set of features and advanced technologies designed to meet the demands of high-performance networking. With its scalability, virtualization support, robust security measures, and energy efficiency, the 8800 Series stands out as a superior choice for organizations seeking to enhance their network capabilities and embrace the future of connectivity.