![](/images/new-backgrounds/1189181/189181265x1.webp)
Using the Cable Holders and Cable Clips
2Slide the ends together and push the cable holders together until you feel them snap into place (see Figure 88).
Figure 88: Connected cable holders
ENIN004
3Connect as many cable holders together as you need to manage your cable bundles.
4To disconnect the holders, grasp one in each hand firmly and carefully pull them apart.
Connecting Cable Clips
To connect the cable clips:
1Hold two clips next to each other with the split sides facing the same way (see Figure 89).
2Slide the connecting grooves together (see Figure 89).
Figure 89: Connecting cable clips
ENIN001A
BlackDiamond 8800 Series Switches Hardware Installation Guide | 133 |
|
|