Installing or Removing an External Compact Flash Memory Card

Installing or Removing an External Compact Flash

Memory Card

You do not need to power off the system or remove the MSM from the chassis to install or remove an external compact flash memory card.

You need an ESD-preventive wrist strap to install a compact flash memory card.

To install the memory card:

1Attach the ESD-preventive wrist strap to your bare wrist and connect the metal end to the ground receptacle on the chassis front panel.

2Locate the compact flash slot on the MSM (see Figure 69).

Figure 69: Typical Compact Flash Slot Location (BlackDiamond 8800 Series MSM)

Console port

Compact flash

ASP038B

3Hold the memory card between your thumb and forefinger. The side with the ridge faces toward the bottom of the chassis.

4Slide the card into the compact flash slot until you feel resistance.; a portion of the card will protrude from the slot.

5Carefully push the card until it is seated into the slot. The card should be fully inserted, or seated, inside the slot.

6To verify that the card is fully seated, use the show memorycard command.

To remove the external compact flash memory card:

1Use the eject memorycard command to ensure that you will not lose any data when you remove the card.

After you use the eject memorycard command, you can physically remove the card from the external compact flash slot on the MSM. For more information about the eject memorycard command, see the ExtremeXOS 12.0 Concepts Guide.

2Attach the ESD-preventive wrist strap to your wrist and connect the metal end of the strap to the ground receptacle on the chassis front panel.

3Locate the black release pin just above the compact flash slot.

4Press the release pin until the card releases from the slot.

The card releases to an intermediate position; the card remains partially inserted but is no longer seated in the slot.

5Remove the card completely and place it in a safe location.

BlackDiamond 8800 Series Switches Hardware Installation Guide

113

 

 

Page 113
Image 113
Extreme Networks 8800 Series manual Installing or Removing an External Compact Flash Memory Card

8800 Series specifications

Extreme Networks 8800 Series is a robust family of network switches designed to cater to the demands of modern data centers and enterprise networks. Engineered for high performance, scalability, and reliability, these switches provide an ideal solution for organizations looking to enhance their network infrastructure.

One of the standout features of the 8800 Series is its high-performance architecture, which supports up to 10 terabits per second of switching capacity. This ensures that the switch can handle the increased bandwidth demands of today’s applications, such as cloud computing and big data analytics. The series also supports a wide range of interface options, including 1G, 10G, and 40G ports, allowing for flexible deployment in various network environments.

A critical advantage of the Extreme Networks 8800 Series is its advanced virtualization capabilities. It supports network virtualization technologies such as Virtual Extensible LAN (VXLAN) and Segment Routing, which help create resilient, efficient, and scalable network topologies. These technologies not only reduce the complexity of the network but also enhance operational efficiency by simplifying the management of virtualized environments.

The 8800 Series comes with built-in cybersecurity features, ensuring that the network remains protected against growing threats. With capabilities such as IEEE 802.1X port authentication and advanced encryption standards, the series effectively secures data integrity and confidentiality. Additionally, Extreme’s “SecureStack” technology further bolsters security by providing robust access control mechanisms, ensuring that only authorized devices can connect to the network.

Another notable characteristic of this series is its Ethernet platform, which supports multigigabit Ethernet up to 100G, enabling organizations to future-proof their network infrastructure. The switches are designed with energy efficiency in mind, utilizing advanced power management technologies that reduce energy consumption and operating costs, making them environmentally friendly solutions.

The availability of centralized management through Extreme Networks’ management software simplifies the complexity of network operations. Features like Zero Touch Provisioning (ZTP) streamline deployment processes, allowing IT teams to quickly implement and configure devices with minimal manual intervention.

In summary, the Extreme Networks 8800 Series offers a comprehensive set of features and advanced technologies designed to meet the demands of high-performance networking. With its scalability, virtualization support, robust security measures, and energy efficiency, the 8800 Series stands out as a superior choice for organizations seeking to enhance their network capabilities and embrace the future of connectivity.