BlackDiamond 8806 AC Power Cord Retainer Channel
3Hold the AC power cord retainer channel as shown in Figure 83.
Figure 83: BlackDiamond 8806 AC Power Cord Retainer Channel
Captive screw
Captive screw | EX_141 |
4Place the retainer channel against the switch as shown in Figure 84. Tighten the captive screw at each end of the channel.
Figure 84: Securing the BlackDiamond 8806 AC Power Cord Retainer Channel
Install and secure the channel bracket to the switch by tightening both captive screws
Captive screw
Captive screw
EX_139
5Starting from the left, lay the first four power cords into the channel (see Figure 85).
6Lay the last two power cords on top of the bottom four cords (see Figure 85).
BlackDiamond 8800 Series Switches Hardware Installation Guide | 129 |
|
|
