Site Preparation

NOTE

As with all electrical equipment, Extreme Networks product lifetimes degrade with increased temperature. If possible, temperatures should be kept at approximately 78° F (25° C) or lower.

Humidity

To maximize equipment life, keep operating humidity between 50% and 70% relative humidity (non- condensing) during typical operation. The equipment can operate between 10% and 95% relative humidity (non-condensing) for short intervals.

Chassis Spacing Requirements

Extreme Networks recommends placing no more than three BlackDiamond chassis next to each other because of to chassis-to-chassis heating. Use the following spacing guidelines when you install your BlackDiamond 8800 series switch:

●Leave a minimum of one empty 19-inch rack between two sets of three adjacent BlackDiamond switches.

or

●Place patch panels between two sets of three adjacent BlackDiamond switches. A patch panel does not require any power and does not generate any heat.

NOTE

Up to five adjacent switches will continue to function without safety concerns. However, product lifetime may degrade with continued exposure to high temperatures in close proximity, and long term reliability may be compromised.

Chassis Airflow Requirements

To ensure proper airflow through a BlackDiamond switch, refer to the following recommendations when you install the switch:

●BlackDiamond 8800 series switches require a minimum of 1.5 inches (4 cm) around both the left and right sides of the chassis from any cabinet wall or other obstruction for proper airflow.

●Air temperature measured approximately 1 inch (2.5 cm) from the fan inlet should be less than 104 °F (40 °C).

In the BlackDiamond 8800 series switches, air moves through the power supplies independently of the airflow through the modules, as shown in Figure 28.

56

BlackDiamond 8800 Series Switches Hardware Installation Guide

 

 

Page 55 Page 57
Page 56
Image 56
Extreme Networks 8800 Series manual Humidity, Chassis Spacing Requirements, Chassis Airflow Requirements
Page 55 Page 57

8800 Series specifications

Extreme Networks 8800 Series is a robust family of network switches designed to cater to the demands of modern data centers and enterprise networks. Engineered for high performance, scalability, and reliability, these switches provide an ideal solution for organizations looking to enhance their network infrastructure.

One of the standout features of the 8800 Series is its high-performance architecture, which supports up to 10 terabits per second of switching capacity. This ensures that the switch can handle the increased bandwidth demands of today’s applications, such as cloud computing and big data analytics. The series also supports a wide range of interface options, including 1G, 10G, and 40G ports, allowing for flexible deployment in various network environments.

A critical advantage of the Extreme Networks 8800 Series is its advanced virtualization capabilities. It supports network virtualization technologies such as Virtual Extensible LAN (VXLAN) and Segment Routing, which help create resilient, efficient, and scalable network topologies. These technologies not only reduce the complexity of the network but also enhance operational efficiency by simplifying the management of virtualized environments.

The 8800 Series comes with built-in cybersecurity features, ensuring that the network remains protected against growing threats. With capabilities such as IEEE 802.1X port authentication and advanced encryption standards, the series effectively secures data integrity and confidentiality. Additionally, Extreme’s “SecureStack” technology further bolsters security by providing robust access control mechanisms, ensuring that only authorized devices can connect to the network.

Another notable characteristic of this series is its Ethernet platform, which supports multigigabit Ethernet up to 100G, enabling organizations to future-proof their network infrastructure. The switches are designed with energy efficiency in mind, utilizing advanced power management technologies that reduce energy consumption and operating costs, making them environmentally friendly solutions.

The availability of centralized management through Extreme Networks’ management software simplifies the complexity of network operations. Features like Zero Touch Provisioning (ZTP) streamline deployment processes, allowing IT teams to quickly implement and configure devices with minimal manual intervention.

In summary, the Extreme Networks 8800 Series offers a comprehensive set of features and advanced technologies designed to meet the demands of high-performance networking. With its scalability, virtualization support, robust security measures, and energy efficiency, the 8800 Series stands out as a superior choice for organizations seeking to enhance their network capabilities and embrace the future of connectivity.
Top Page Image Contents