IBM 2179, 6643 manual IBM Enhanced Diagnostic error codes

IBM Enhanced Diagnostic error codes

Refer to the following diagnostic error codes when using the diagnostic tests. See “Diagnostics and test information” on page 5 for the specific type for information about the diagnostic programs.

In the following index, X can represent any number.

Diagnostic Error Code	FRU/Action
000-000-XXX	1.	No action
BIOS Test Passed
000-002-XXX	1.	Flash the system
BIOS Timeout
	2.	System board
000-024-XXX	1.	Flash the system
BIOS Addressing test failure
	2.	System board
000-025-XXX	1.	Flash the system
BIOS Checksum Value error
	2.	Boot block
	3.	System board
000-026-XXX	1.	Flash the system
FLASH data error
	2.	Boot block
	3.	System board
000-027-XXX	1.	Run Setup
BIOS Configuration/Setup error
	2.	Flash the system
	3.	Boot block
	4.	System board
000-034-XXX	1.	Reboot the system
BIOS Buffer Allocation failure
	2.	Flash the system
	3.	Run memory test
	4.	System board
000-035-XXX	1.	Flash the system
BIOS Reset Condition detected
	2.	System board
000-036-XXX	1.	Flash the system
BIOS Register error
	2.	Boot block
	3.	System board
000-038-XXX	1.	Flash the system
BIOS Extension failure
	2.	Adapter card
	3.	System board
000-039-XXX	1.	Flash the system
BIOS DMI data error
	2.	System board
000-195-XXX	1.	Information
BIOS Test aborted by user
	2.	Re-start the test, if necessary
000-196-XXX	1.	Press F3 to review the log file
BIOS test halt, error threshold exceeded
	2.	Re-start the test to reset the log file

Chapter 5. Symptom-to-FRU Index 37