IBM 6643, 2179 manual 030-03X-XXX Scsi signal cable 030-04X-XXX, XXX Information, XXX No action

Diagnostic Error Code	FRU/Action
030-00X-XXX	1.	SCSI signal cable
030-01X-XXX
	2.	Check power supply
SCSI interface failure
	3.	SCSI device
	4.	SCSI adapter card, if installed
	5.	System board
030-027-XXX	1.	SCSI signal cable
SCSI interface Configuration/Setup error
	2.	Flash the system
	3.	SCSI device
	4.	SCSI adapter card, if installed
	5.	System board
030-03X-XXX	1.	SCSI signal cable
030-04X-XXX
	2.	Check power supply
SCSI interface error
	3.	SCSI device
	4.	SCSI adapter card, if installed
	5.	installed System board
030-195-XXX	1.	Information
SCSI interface Test aborted by user
	2.	Re-start the test, if necessary
030-196-XXX	1.	Press F3 to review the log file
SCSI interface test halt, error threshold
	2.	Re-start the test to reset the log file
exceeded
030-197-XXX	1.	Make sure the component that is called
SCSI interface test warning
		out is connected and/or enabled
	2.	Re-run test
	3.	Component that is called out in warning
		statement
	4.	Component under test
030-198-XXX	1.	If a component is called out, make sure
SCSI interface test aborted
		it is connected and/or enabled
	2.	Flash the system and re-test
	3.	Go to the ″Undetermined problems″
		section
030-199-XXX	1.	Go to the ″Undetermined problems″
SCSI interface test failed, cause unknown
		section
	2.	Flash the system and re-test
	3.	Replace component under function test
035-000-XXX	1.	No action
RAID interface Test Passed
035-0XX-XXX	1.	RAID signal cable
RAID interface Failure
	2.	RAID device
	3.	RAID adapter card, if installed
	4.	System board
035-195-XXX	1.	Information
RAID interface Test aborted by user
	2.	Re-start the test, if necessary

48Hardware Maintenance Manual