IBM 6643 Diagnostic Error Code FRU/Action 018-195-XXX PCI card, XXX No action, XXX Information

Diagnostic Error Code	FRU/Action
018-195-XXX	1.	PCI card
PCI Card Test aborted by user
	2.	Information
	3.	Re-start the test, if necessary
018-196-XXX	1.	Press F3 to review the log file
PCI Card test halt, error threshold exceeded
	2.	Re-start the test to reset the log file
018-197-XXX	1.	Make sure the component that is called
PCI Card test warning
		out is connected and/or enabled
	2.	Re-run test
	3.	Component that is called out in warning
		statement
	4.	Component under test
018-198-XXX	1.	Make sure the component that is called
PCI Card test aborted
		out is connected and/or enabled
	2.	Flash the system and re-test
	3.	Go to the ″Undetermined problems″
		section
018-199-XXX	1.	Go to the ″Undetermined problems″
PCI Card test failed, cause unknown
		section
	2.	Flash the system and re-test
	3.	Replace component under function test
018-250-XXX	1.	PCI card
PCI Card Services error
	2.	Riser card, if installed
	3.	System board
020-000-XXX	1.	No action
PCI Interface Test Passed
020-0XX-XXX	1.	PCI card
PCI Interface error
	2.	Riser card, if installed
	3.	System board
020-195-XXX	1.	Information
PCI Test aborted by user
	2.	Re-start the test, if necessary
020-196-XXX	1.	Press F3 to review the log file
PCI test halt, error threshold exceeded
	2.	Re-start the test to reset the log file
020-197-XXX	1.	Make sure the component that is called
PCI test warning
		out is connected and/or enabled
	2.	Re-run test
	3.	Component that is called out in warning
		statement
	4.	Component under test
020-198-XXX	1.	If a component is called out, make sure
PCI test aborted
		it is connected and/or enabled
	2.	Flash the system and re-test
	3.	Go to the ″Undetermined problems″
		section

46Hardware Maintenance Manual