SPECIFICATIONS
Model | PV7001C |
|
|
No load speed (RPM) | 600 - 2,000/min. |
|
|
Overall length | 210 mm |
|
|
Net weight | 2.0 kg (4.4 lbs) |
|
|
Spindle thread | 5/8” |
|
|
•Manufacturer reserves the right to change specifications without notice.
•Specifications may differ from country to country.
GENERAL SAFETY RULES |
(For All Tools)
WARNING:
Read and understand all instructions. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury.
SAVE THESE INSTRUCTIONS
Work Area | Electrical Safety |
1.Keep your work area clean and well lit. 4. Grounded tools must be plugged into an
Cluttered benches and dark areas invite acci- | outlet properly installed and grounded in | ||
dents. | accordance with all codes and ordi- | ||
2. Do not operate power tools in explosive | nances. Never remove the | grounding | |
prong or modify the plug in any way. Do | |||
atmospheres, such as in the presence of | |||
not use any adaptor plugs. Check with a | |||
flammable liquids, gases, or dust. Power | |||
qualified electrician if you are in doubt as | |||
tools create sparks which may ignite the dust | |||
to whether the outlet is | properly | ||
or fumes. | |||
grounded. If the tools should electrically mal- | |||
3. Keep bystanders, children, and visitors | |||
function or break down, grounding provides a | |||
away while operating a power tool. Distrac- | low resistance path to carry electricity away | ||
tions can cause you to lose control. | from the user. |
| |
2
