P 4 / 8
Repair
< 3 > Disassembling Gear Housing (cont.)
3.Remove four 5x25 tapping screws and two 5x55 tapping screws as illustrated in Fig. 6.
Removal of the screws will release tubular handle from gear housing.
4.Remove tubular handle from the bottom side of gear housing L as illustrated to left in Fig. 7.
5.Remove gear housing R from gear housing L as illustrated to right in Fig. 7.
Fig. 7
Fig. 6
Tubular handle
Tapping screw 5x25
Tapping screw 5x55
Tubular handle
Oil tank
Gear housing L
Gear housing R
Gear housing L
<4 > Replacement of Straight Bevel Gear 43 and Oil Pump Complete
1.Remove gear housing R from gear housing L as described in "<3> Disassembling Gear Housing". (Fig. 5, 6, 7)
2.Remove ball bearing 608ZZ using Bearing extractor (No.1R269) (Fig. 8)
3.Remove safety washer from spindle. And now straight bevel gear 43 can be removed from spindle. (Fig. 8)
Note: Before installing a
Fig. 8
[Gear housing viewed from the position A] |
A |
Straight bevel gear 43 |
Safety washer |
Ball Bearing 608ZZ |
Bearing extractor |
(No.1R269) |
(to be continued to next page)
