P 8 / 8
Wiring diagram- (2) Inside Handle (L)
1.Before installing Main switch onto Handle (L), fix the following lead wires with lead wire holders as illustrated in Fig. 19.
*Field lead wire (orange)
*Field lead wire (yellow)
*Lead wire (black) from switch installed on Gear housing (L)
Fig. 19
Main switch | Lead wire (black) from |
| Switch installed on |
| Gear housing (L) |
| Field lead |
Noise suppressor | wire (orange) |
|
Field lead wire (yellow)
Lead wire holders
Handle (L)
2.After installation of Main switch, put the loose portion of the Lead wires into the space illustrated in Fig. 20.
Fig. 20
Main switch
Noise suppressor
Put the loose portion of
lead wires into this pace.
Handle (L)
[end of repair manual]
