Specific Safety Rules | USE01 1 ~ 2 |
|
1.Hold the tool firmly.
2.Secure the workpiece firmly.
3.Keep hands away from moving parts.
4.Edges and chips of the workpiece are sharp. Wear gloves. It is also recom- mended that you put on thickly bottomed shoes t o prevent injury.
5.Do not put the tool on the chips of the workpiece. Otherwise it can cause damage and trouble on the tool.
6.Do not leave the tool running. Operate the tool only when
7.Always be sure you have a firm footing.
Be sure no one is below when using the tool in high locations.
8.Do not touch the blade or the workpiece immediately after operation; they may be extremely hot and could burn your skin.
9.Avoid cutting electrical wires. It can cause serious accident by electric shock.
SAVE THESE INSTRUCTIONS.
| SYMBOLS |
The followings show the symbols used for tool. | |
v | ..................................... olts |
A | .................................... amperes |
Hz | .................................... herts |
% | .................................... alternating current |
n, | .................................... no load speed |
loi | .................................... Class II Construction |
..Jmin | ................................... revolutions or reciprocation per minute |
4