Installingcutting head
CAUTION:
Secure the cutting head firmly. Otherwise it can rotate during operation and can cause serious injury.
Insert the cutting head into the tool with turning it left and right alternately. Then
tighten the three screws with the hex Cutting head 7 wrench.
I
\Hex wrench
OPERATION
CAUTION:
Edges and chips of the workpiece are sharp. Wear gloves. Otherwise it can cause injury.
Secure the workpiece firmly. Move the tool forward keeping the side blades flush with the workpiece surface.
Adjusting shear blade
Adjust the side blade L so that the curl of waste material does not contact the cutting head or the workpiece. Use the hex wrench to loosen the three screws which hold the cutting head. Move the side blade L back and forth to adjust it. Then tighten the three screws with the hex wrench.
| Center blade |
Side blade L | Screws |
&Side b l a k 'Ieeve Center blade
I
1
7
