To remove the bit, pull the locator. Then grasp the bit with a pair of pliers and pull the bit out of the magnetic bit holder. Sometimes, it helps to wiggle the bit with the pliers as you pull.
| 1. | Locator |
| 2. | Bit |
| 3. | Magnetic bit |
|
| holder |
1 |
|
|
2 | 3 |
|
015167 |
|
|
To install the bit, push it firmly into the magnetic bit holder. Then install the locator by pushing it firmly back.
Hook |
| |
2 | 1 | 1. Groove |
| 2. Hook | |
|
| 3. Screw |
|
| 1 |
| 3 | 2 |
| 3 | |
|
| |
015168 |
| |
The hook is convenient for temporarily hanging the tool. This can be installed on either side of the tool.
To install the hook, insert it into a groove in the tool housing on either side and then secure it with a screw. To remove, loosen the screw and then take it out.
OPERATION
Screwdriving operation
015169
Fit the screw on the point of the bit and place the point of the screw on the surface of the workpiece to be fastened. Apply pressure to the tool and start it. Withdraw the tool as soon as the clutch cuts in. Then release the switch trigger.
CAUTION:
•When fitting the screw onto the point of the bit, be careful not to push in on the screw. If the screw is
pushed in, the clutch will engage and the screw will rotate suddenly. This could damage a workpiece or cause an injury.
•Make sure that the bit is inserted straight in the screw head, or the screw and/or bit may be damaged.
MAINTENANCE
CAUTION:
•Always be sure that the tool is switched off and the battery cartridge is removed before attempting to perform inspection or maintenance.
•Never use gasoline, benzine, thinner, alcohol or the like. Discoloration, deformation or cracks may result.
To maintain product SAFETY and RELIABILITY, repairs, carbon brush inspection and replacement, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts.
OPTIONAL ACCESSORIES
CAUTION:
• These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose.
If you need any assistance for more details regarding these accessories, ask your local Makita Service Center.
•Phillips Insert bits
•Magnetic bit holder
•Makita genuine battery and charger
•Plastic carrying case
NOTE:
Some items in the list may be included in the tool package as standard accessories. They may differ from country to country.
8
