Mamiya 6MF manual The self-timer can be reset by simply following the above steps

You may over-ride the AE mode and select the aperture and shutter speed manually. Simply set the shutter speed against the white line index mark and also set the lens aperture to the desired “f"stop.

As noted previously when the shutter re- lease button is touched slightly, the proper shutter speed will be indicated by a blinking LED. A non-blinking LED will indicate the set shutter speed. Adjust the exposure accordingly. To do this, turn the shutter speed dial and/or aperture ring to align the two LEDs or until they become one. The single LED indicates proper shutter speed.

*When on manual, and the shutter release button is touched slightly, the LED indicators will light for ten seconds. They can be illumin- nated in ten second increments by simply pressing the button again.

1.Shift the self-timer lever in the direction of the arrow to ” r?‘, “_

2.The shutter is released about 10 seconds after pressing the shutter release button. The LED on the front of the camera illumi- nates for about 8 seconds, then blinks for about 2 seconds, and then the shutter is released.

3.Be sure to return the self-timer lever to its normal position after use.

•The self-timer can be reset by simply following the above steps.

* Under the self-timing mode make sure a tripod or other secure method is used to steady the camera.

•When the shutter is set to "B" (bulb), the self-timer does not operate.

24