[Pulling out the retractable | [Retracting (storing) the lens |
lens mount] | mount] |
1.While pressing in the retraction button
(A) on the camera body in the direction of the arrow, pull out the lens and lens mount until it clicks.
2.When both have been pulled out, take your figners off the retraction button, and make sure that both are completely pulled out.
1.While pressing in the retraction button
(A)on the camera body in the direction of the arrow, push the lens straight in towards the camera body.
2.When the lens mount has been retracted in place, take your fingers off the button and make sure that the lens is securely seated in the camera body.
The camera will not function with- out batteries.
1. Remove the battery chamber cover on |
the bottom of the camera with a coin or |
screwdriver. |
2. “+”is indicated on the inside of the |
battery, chamber cover. Insert the two bat- |
teries, being sure to properly place each |
|
| _~. |
|
| *Once the lens mount is retracted. a safety | |
~The camera is a precision instrument. i | ||||||
mechanism is actuated to prevent the lens from | ||||||
When working the retractable lens ~ | being removed and the shutter released. | |||||
L | mount, be sure to avoid abusive han- ; | + When the shutter release button is touched | ||||
dllng. | ||||||
~ slightly (when the batteries are in the chamber) a | ||||||
|
|
|
|
| ||
|
|
|
|
| red LED lights in the upper right corner of the view- | |
battery with the “+” side up, facing the |
cover. |
[Batteries]
The Mamiya 6 MF uses either two SR44 silver oxide batteries or two LR44 alkaline manganese batteries.
11
