Mounting/Removing Lenses
Mounting lens
1. Mounting lens.
Align Lens Alignment Dot “A” with the Camera Alignment Dot “B”. Insert the lens into the camera body. Then turn the lens in the direction of the arrow (clockwise) until it clicks and locks into place.
*Remove the front and rear lens caps. The front lens cap can be removed by pressing in the tabs on the right and left with your fingers and pulling the cap towards you.
The rear lens cap can be removed by rotating it counterclockwise.
2. Opening the light shield curtain.
To open the light shield curtain, slide the light shield curtain release lever along to follow the arrow 
down and right. This will cause curtain to snap open. The light shield lever indicator- (a white line) is then
aligned with 
*When the light shield curtain is closed, the shutter cannot be released. When taking a picture, open the light shield curtain.
11
