Mamiya 7 II manual Prevention of Light Leaks Due To Loose Film Winding

Models: 7 II

1 45
Download 45 pages 20.83 Kb
Page 21
Image 21

Loading the Film

Prevention of Light Leaks Due To Loose Film

Winding

* Use your left thumb to press lightly on the paper leader while advancing winding lever slowly to assure smooth and tight film take-up on the empty spool. Advance the film and align the printed arrow start mark with the small triangle start mark on the camera. Then close the camera back.

For preventing the film loose winding

When any other numeral than "S" appears in the exposure counter window, it is an indicted that the film is loaded. So do not open back cover.

If the film is not properly aligned with the “” indicator, the film may be improperly loaded and cause spacing problems.

When a 6EX roll film (5 exposures) is used, the procedure of loading the film is the same as with 120 roll film.

Make sure backing paper advances evenly between the spool flanges and does not begin to slant. If it advances unevenly, remove the backing paper from the take-up spool and start over again.

Do not pull excessively on the backing paper, and do not load/unload the film in direct sunlight: bright light may fog the film.

Before loading the film into the camera, be careful of the film looseness.

When photographing with the 135 Panoramic Adapter, see its instructions.

19

Page 21
Image 21
Mamiya 7 II manual Prevention of Light Leaks Due To Loose Film Winding, For preventing the film loose winding