Mamiya C330S: Page 14
Loading Film | 14 |
1.Open the back cover and pull out the upper spool change knob (31), then insert an empty
spool into the
2.Pull out the lower spool change knob (32), and insert a
roll of film into the film chamber (38).
By turning the spool change knobs either to the right or to the left after pulling them outward, the knobs stay at their protruded positions. Turn the knobs backward to reinsert them.
·If either spool change knob is not returned to its original position after loading film, unbalanced film winding will result.
To make sure that the spool change knobs fit their original positions, move the spools slightly to the right and to the left or up and down.
<- Prev Table of Contents Next
file:///E/c330s/page_14.html