Mamiya C330S: Page 22
| 22 |
When Using a 55mm or 65mm Lens:
When using a 55mm or 65mm lens, set the dial (10) to 80 and attach the parallax correction plate for 55mm/65mm lenses to the focusing hood.
How to Install the Parallax Correction Plate:
Remove the focusing hood from the camera and turn it inside out. Also turn the correction plate inside out and insert its chamfered edge into the two catches on the hood, then fit the correction plate while pulling out the slide lock on the opposite side. When the slide lock is released, the plate is secured.
The figures visible on the left side of the correction plate after attaching the focusing hood to the camera reveal the exposure factor. Observe the line on the right for correcting parallax. When the pointer indicates 1.5, the upper portion of the first line will be cut off. In turn, this becomes a correcting scale when the exposure factor is 2, 2.5 and 3.
<- Prev Table of Contents Next
file:///E/c330s/page_22.html
