Manitowoc Ice installation instructions K00105 Adapter KIT, Installation Instructions

K00105 ADAPTER KIT

Installation Instructions

1.Use the K00105 to install 22” B, J, Q, or S-series ice machines on a Manitowoc C-170, C-400, C-470, or C-570 bin.

2.Installation (bin to be level before starting):

A.Remove the hinge on the left side of the bin.

B.Remove the foam tape on the left rail. Trim back the foam tape on the front and rear bin rails, as shown.

C.Position the adapter panel and hinge on bin and fasten with the two existing screws.

D.Using the adapter as a template, drill three 5/32” (4 mm.) holes, .500” (12.7 mm.) deep maximum, in the rear of the bin (adapter must be level with bin). Warning: Do not drill through interior liner. Attach with the screws provided.

E.Apply foam tape to the edge of the adapter, as shown. Note: We recommend using RTV at intersections and along front inside edge of foam tape to prevent water tracking. Use double thickness with S-series ice machines.

3.Refer to ice machine installation manual for ice machine installation procedures.

	Ice
	Machine
	Back
	Existing two
	Screws
	Hinge
Trim Back Existing Foam Tape	Foam Tape from Kit (trim to
8 11/16”
	fit) - Double Thickness of
	Tape with S-series
	Screws from Kit
Double Thickness of Tape	Drill three 5/32” dia.
with S-series
	Holes (use Adapter as a
	Template to Locate Holes
	on Bin)
	IMPORTANT
	DO NOT DRILL THROUGH
	THE INSIDE OF THE BIN
	LINER - ONLY THROUGH
	OUTER METAL

Manitowoc Ice, Inc.

2110 South 26th Street, P.O. Box 1720, Manitowoc, WI 54221-1720 USA
Telephone 920-682-0161, Fax - Sales: 920-683-7589, Service/Parts: 920-683-7585, Other: 920-683-7879	8008913
Web Site - www.manitowocice.com	Rev. 05/12/04