MFD-50 DISPENSER

Door Replacement Kit

CAUTION: DISCONNECT POWER SUPPLY BEFORE BEGINNING WORK.

Actuating Switch Spring Replacement

NOTE: Two springs are included in this kit for replacement of the spring in the ice delivery actuating switch. One spring is an extra in the event one is lost, dropped, etc.

1.Remove the upper front panel from the dispenser and the switch cover inside.

2.Remove the ice delivery actuating switch from its mounting bracket (the switch is located left of the ice chute door assembly).

3.Note the position of the compression spring between the steel actuating lever and switch.

4.Remove the old spring; install the new spring. Ensure the spring is seated over the boss on the switch and in the indentation on the switch lever (Illustration “A”).

5.Adjust the ice delivery actuating switch by bending the switch lever, as shown in Illustration “B”. This is a preliminary adjustment. The final adjustment will be made in step 4 of “Door Assembly Replacement Procedures”.

6.Reinstall the actuating switch.

Door Assembly Replacement Procedures

1.Remove the entire ice chute door assembly and spacer from the dispenser by removing the two nuts in the hinge.

2.Install the new door assembly using the existing nuts and star washers.

NOTE: Position the door before tightening the nuts so that the door will not interfere with the ice chute hardware, allowing the door to open and close freely.

3.Remove the rubber bumper on the stainless steel panel behind the ice delivery arm and discard.

4.Push in the bottom of the activating arm until the actuating switch “clicks”. The “click” should occur, when the activating arm is 1/8” to 1/4” away from the stainless steel dispenser panel behind the activating arm (Illustration “C”). If the switch does not click, rebend the actuating switch lever until the desired adjustment is achieved. This is required to minimize ice spillage.

5.Ensure the ice chute door moves freely, when the activating arm is depressed and released.

6.Reinstall the front panel.

Manitowoc Ice, Inc.

2110 South 26 Street, P.O. Box 1720, Manitowoc, WI 54221-1720 USA

 

Telephone 920-682-0161, Fax - Sales: 920-683-7589, Service/Parts: 920-683-7585, Other: 920-683-7879

8008013

Web Site - www.manitowocice.com

Rev. 06/21/00

Page 1
Image 1
Manitowoc Ice manual MFD-50 Dispenser, Door Replacement Kit, Manitowoc Ice, Inc

MFD-50 specifications

The Manitowoc Ice MFD-50 is a leading ice maker renowned for its innovative design, efficiency, and reliability. This versatile ice machine is a vital component in various commercial settings, including restaurants, bars, and hotels, where ice production is a necessity.

One of the standout features of the MFD-50 is its impressive production capacity. The machine can generate up to 525 pounds of ice per day, depending on ambient conditions, making it suitable for businesses with high ice demand. Unlike traditional ice makers, the Manitowoc MFD-50 employs a self-contained system, which simplifies installation and reduces space requirements, allowing it to fit in compact areas.

The MFD-50 is equipped with the advanced Manitowoc ice-making technology that ensures lasting performance and reliability. It uses an efficient refrigerant that maintains optimal temperature levels, resulting in high-quality ice production while keeping energy consumption low. This eco-friendly refrigerant contributes to a reduction in the overall environmental impact of commercial refrigeration.

Another noteworthy characteristic of the MFD-50 is its Flexi-ice technology. This unique feature produces ice in a variety of configurations, catering to the diverse preferences of customers. The MFD-50 can generate half-cube or full-cube ice, allowing operators to serve a range of beverages perfectly. Whether it’s for chilling cocktails or filling ice bins, the versatility of the ice produced enhances overall service quality.

The machine’s design also prioritizes user-friendliness. Its intuitive control panel simplifies operation, enabling users to manage production settings easily. Regular maintenance is straightforward due to its accessible components, ensuring that owners can perform cleaning and repairs without extensive technical knowledge.

Furthermore, the Manitowoc MFD-50 is designed for durability, with high-quality materials that withstand the rigors of daily commercial use. Stainless steel construction not only enhances the machine’s aesthetics but also contributes to its longevity, ensuring consistent ice production over time.

In conclusion, the Manitowoc Ice MFD-50 stands out in the commercial ice-making market thanks to its high production capacity, flexible ice options, cutting-edge technology, and durability. This ice machine is an essential asset for any business looking to meet its ice needs efficiently and effectively, ensuring customer satisfaction with every serving.
Top Page Image Contents