8.When the semi-transparent masking and logo are in place, apply pressure against the top of the masking, working out any visible air bubbles. Remove the semi-transparent logo masking very slowly, allowing only the urethane logo to remain in the space within the template frame. As the semi-transparent masking is pulled back, make sure no stray pieces of urethane logo remain attached to the semi-transparent masking. If this occurs, slowly lower the masking and press firmly against it to make sure the remaining piece sticks to the stainless steel.
9.Remove the template from the surface of the stainless steel front panel.
10.Reattach the stainless steel front panel to the ice machine.
11.If the machine is on a beverage dispenser, re-attach the drink dispenser ice bin cover.
Manitowoc Ice, Inc.
2110 South 26th Street, P.O. Box 1720, Manitowoc, WI 54221-1720 USA | 000002851 |
Telephone 920-682-0161, Fax - Sales: 920-683-7589, Service/Parts: 920-683-7585, Other: 920-683-7879 | Rev 01 |
Web Site - www.manitowocice.com | 5/25/10 |